Both the high temperature fan and the boiler induced dr […]
Both the high temperature fan and the boiler induced draft fan are used to convey gas at a temperature of 140 degrees or higher. When the gas temperature is high, the density p is small, the generated pressure is low, and the required power is much smaller.
Because before the high temperature fan starts, the temperature of the gas is difficult to reach the working temperature. In some cases, the furnace can only be heated when it moves at room temperature. At this time, after closing the damper, pay attention to the overload of the motor.
If the air temperature of the ventilation work is very different from the air temperature of the ventilator, whether it can be started directly depends on the situation.external rotor motor fan Manufacturers
If it is not treated well, the motor may be burnt. Therefore, everyone must pay attention to the high temperature fans and boiler induced draft fans when they start, or they will suffer corresponding losses.